Suggestions on first canoe

Grumman
For only 300 dollars, a used Grumman might be your best bet. You wouldn’t need to store it inside, either, just lock it to a fence or something.



I’m not saying you have to spend more than 300, but if 300 is the budget, it doesn’t make sense for us to recommend make/models, as you will have to see what you can get.



I agree with avoiding everything by Coleman/Pelican, as they are the worst canoes I have encountered.

Central Florida+used canoe=Mohawk
Your profile says Central Florida. I just spent a week in Sanford and saw lots of used Mohawk canoes in the Orlando Craiglist. (They used to be manufactured there.) At the moment there are five or six Mohawk Blazers for sale at $300 or less. Our first canoe was a 16 ft Blazer and it’s really a pretty nice boat. Weight would be the only downside, since it’s not the lightest boat around.

storage
I have never seen a second floor apartment that I could get a freaking canoe into. If there is a rental place near you go see what they are selling and ask about storage options. You may be able to rent space from them. Other than that, and I hate to say this cause I am a canoe guy, you may be better with 2 small kayaks that you can get into the house.

if you know you like it.
Then wait and get a better boat. If you are going to use it get something you really want. It’s like buying cheap tires, but buying expensive jeans. Your going to use the tires way more. A used composite boat would

be perfect for Florida.



It will be light to carry and a joy to paddle. Get decent wood paddles and you will like it even more.



Ryan L.

For under $700 = used Royalex will be
the majority. Used to be that one could find a steal of a kevlar tandem slightly over $1k but I think you’ll find the norm for composite tandems around $1600 minimum…and that’s a steal. Keep your eyes open…but you might wanna look for a used Royalex tandem 16’ or 17’= better…for flatwater and try to go the “paid storage” route if possible. Above all else…don’t get something cheap and light = as it’ll oilcan on you = sheer hell. OldTown(Penobscots…Discoverys are really heavy as hell).

Dagger, Madriver and Wenonah have made some terrific boats… When you find one/some post up for advice…there are always a few dogs that’ve been made.

$.01

Thank you
Thank you all for your thoughts. It seems i need to do some rethinking. I was just pulling a number out of air with the $300. In all honesty under a $800 is really what I’m looking for.



We were looking at the Mohawk brand as they are about the right weight/size and seem to have a good history from what I could tell. The nova 16’ was recommended by their customer service rep, which seems like a nice boat. Any opinions on this brand or this particular model?



As for getting the canoe into the apartment I can be done. Not the easiest, but better than leaving the boat mounted to the roof of my truck… Or is it? Can I leave it on my truck if it is properly secured and protected from the weather?



Still accepting brand and model recommendations so please feel free to let me know what canoe would be a good one to keep my out for?

Why not consider an inflatable.
Innova or Sea Eagle.

Alum
If you want the option to leave it on your truck or somewhere else outside, I’ll second the recommendation above to get an aluminum canoe. Can’t beat alum for weather resistance. My dad has had his canoe sitting out in his yard for literally 40 years with no maintenance beyond hosing it off occasionally. And good aluminum canoes don’t weight any more than royalex. They can be had for cheap and will hold their value. You should can sell it for what you paid for it when you’re ready to move on. Grumman and Alumacraft are good brands.

Solo canoes
Much more fun to paddle than a tandem, shorter, lighter, easier to get upstairs.

Mine is 12.5 ft, 25#, and I keep it in the living room of my second floor condo.

Paddle-Addict …
… are you near central Fl. ??



I’ll send you an email .

First boat

– Last Updated: Jun-16-11 3:06 PM EST –

I'm another fan of the ubiquitous Grumman aluminum as a first boat. Lighter than a OT Discovery of equal length, good initial stabilty, next to no maintenance or upkeep, you don't have to worry about running it up on a sandbar and scratching it. You can find decent examples used on CL for $300 all day long and then sell it for the same amount in a couple years when you want to upgrade.

I wouldn't pay more than $300 for a used Grumman though. Some people who have newer Grummans that aren't dented and banged up and have been well taken care of think they are worth $600-$700 for what amounts to cosmetics. I realize they paid more than that if they bought it new and want to recoup some of their initial outlay because they only used their boat on lakes and it's never touched a rock. The reality is that a Grumman can be pretty well banged up and paddle just as well as a new one.

On the other hand, $800 will put you square into "used Royalex in pretty nice condition" territory and a few hundred more will get you into Older Kevlarville.

What do you think…
about this one



http://i191.photobucket.com/albums/z11/drew31589/92074473.jpg



Its a 17’ grumman aluminum. The guy is asking $350. I tried to get the serial number and extra pics, but the seller is currently in the hospital from an auto accident and will be there for the next week. He said that is the reason he is selling, but from the picture it looks fairly new and in good shape. Plus he’s only an hour away.

well
It will be very heavy and noisy when paddling. There is something nostalgic about paddling an aluminum tank. By getting a grumman you are staking your claim in the grumman vs alumacraft old canoe battle.



Ryan L.

you will have to go look and water test
Its possible the boat looks good and still leaks. Rivets get loose and seams separate.



And sometimes the old Grumman is just as good as the picture shows.



Having babysat a couple of dozen Grummans they are fine for a first boat. And I have had to fix a couple that looked good and leaked.

Florida , Sun , Hot metal …

– Last Updated: Jun-18-11 12:55 PM EST –

...... aluminum gets sorta hot in the Sun , not as hot as like the sheet metal body of a car though .

I think the water absorbs some of the heat from the alum. . Grummans and the like (alum.) make pretty loud noises when things move and shuffle around in them . They have hard keels , kinda snaggy on rocks and such . They dent (especially the thinner ones) .

I've always been in and around Jon boats and they are alum. , though heavier gauge . I'd prefer no other material than alum. in Jon boat . I've paddled Grumman canoes also , and would not want to own one ... I'd still paddle one as a rental or borrow though , wouldn't hurt my feelings none , they paddle OK and are stable .

Check this out
Try EBay, I live in Ohio and see tons of boats I would love to bid on in your area but too far for me to go since i am only looking for a second loaner boat to use when inviting friends to go with. Like someone said it might be a while to find one in your budget but I think you are being smart looking for a starter boat. Who knows if space is no object you may end up keeping it as a loaner or to use under different conditions then the boat you may ultimately purchase later on. Have fun, be safe, enjoy.

I have that exact same boat
sitting in my yard. If it doesn’t leak - Buy it. Get seller to throw in his paddles if you can.

Mad River Explorer 14
Smallish but will do it all. My recommendation for a first canoe this week.

First canoe
I began with a 15 foot Coleman and did fine. 16 feet or longer will go faster. I prefer polyethylene or ABS boats to aluminum because they are quieter. You should be able to find a canoe in your price range at Dunham’s or Dick’s Spoting goods and perhaps even at Sam’s Club. I have seen some canoes advertised there for around $300-$350 recently.

HERESY
the price range on tandem canoes runs from Pelicans @ ~$400 to Swifts Carbon infusions with synthetic rails, ~ $4000. Locked into the lower end of the array, a used Grummy is probably a pretty good bet. It’s a way better ride than the rotomolded and PE canoes. Yeah, you’ll want something lighter, faster, etc later.



One place you must not scrimp is your paddles. They should fit you, both, and need to be well enough shaped to provide some blade sensitivity in the water.



If you’re going to sit you should select bents, if you kneel straights are preferred.



Fox Werks, Sawyer and Bending Branches have pretty good sticks around $80, but you’ll be better off spending $100-125 each.



email me for a fit protocol.